Skip to content
NEW!!! PRE-ORDER 3DRS Standard Resin. Rigid, Multipurpose 3D Printing Resin
NEW!!! PRE-ORDER 3DRS Standard Resin. Rigid, Multipurpose 3D Printing Resin

Standard 3D Printing Resin - For DLP/LCD 3D Printers

$44.95

FREE Shipping on domestic resin orders of $100+ limitations may apply. 

Rigid, Multi-Purpose 3D Printing Resin for everyday users. Plug and Play functionality. Easily utilize 3DRS Standard with pre-supported models or auto-support features. 3DRS is a rigid, medium-hard resin that remains non-brittle when green allowing prints to be easily and safely removed from the build plate and post processed with ease. 

3DRS Standard will also be available as a Color Base after launch for use with our CMYKW+Base 3D Pigment sets. 

Designed for printing on DLP/LCD 3D Printers including but not limited to UNIZ SLASH Series, Elegoo Mars, Anycubic Photon / Photon S, Creality Resin Printers, EPAX, etc. 

Liters Ship in a 34oz (1000ml) Square Leak-proof container with a tamper-evident cap.

Shore D Hardness: 70
UV Absorption:
405, 395
Uncured Density:
1.11 (g/ml)
Shelf Life: minimum 1 year unopened .

CREDIT TO DESIGNER: The Minis we print are from Artisan Guild unless otherwise stated in the photo. Artisan Guild makes some amazing stuff, check them out here: https://www.patreon.com/ArtisanGuild

Settings on the Creality LD-002R

~Layer thickness (mm): .05

~Normal Exposure Time (s) 8s

~Bottom Exposure (s): 70

~ Bottom Layers (s): Min. 4 - 8 

Settings on the Elegoo Mars or Anycubic Photon 

~Layer thickness (mm): .05

~Normal Exposure Time (s) 8s

~Bottom Exposure (s): 70

~ Bottom Layers (s): Min. 4 - 8 

NOTE: the final products printed with U.V Resins are not intended or acceptable for direct food contact and are not safe to place in the mouth, even when properly dried and cured. Do not print products for any person or pet who may chew on or otherwise orally ingest the product.

Download Safety Data Sheet Here

Store & Usage:
1.Store in a cool DARK place between 18-28C - Keep container away from light exposure during storage to avoid light contamination. 
2. Avoid any direct sunlight during usage. 
3. Shake well before use.
4. After printing, please wash your print in alcohol with the content of above 90
5. Use at temperature 18-28C

 

Customer Reviews

Based on 4 reviews Write a review