Skip to content

Painters Set #1

$169.95

IN THE BOX: 

2 - 950ml Bottles of HERO Grey

1 - 950ml Bottle of HERO Clear

2 - 950ml Bottles of HERO WASH Post Print UV CLeaner

 

Very low odor and fast curing.

EXCELLENT Shock and Impact Resistance

Technical Data

The Hero line of DLP Resins was designed for general form printing at lower exposure times. Hero Resin can be used on a wide range of DLP printers and exhibits excellent durability, definition, and range of use.

 

Recommended ANYCUBIC Photon Slicer settings for HERO Resin:

~Layer thickness (mm): .05

~Exposure Time (s): 10-15   

~Bottom Exposure (s): 50-70

~ Bottom Layers (s): Min. 4   (ANYCUBIC defaults to 8)

The primary color line can be blended together to create your own custom color creations. Utilize the Opaque White, Black, or grey to add opacity and depth.   

See a test print an AnyCubic here:

NOTE: the final products printed with the Hero and/or the Anti-hero line of U.V Resins are not intended or acceptable for direct food contact and are not safe to place in the mouth, even when properly dried and cured. Do not print products for any person or pet who may chew on or otherwise orally ingest the product.

Download Safety Data Sheet Here

Store & Usage:
1.Store in cool dry places between 18-28C
2. Avoid any direct sunlight during usage. 
3. Shake well before use.
4. After printing, please wash your print in alcohol with the content above 90
5. Use at temperature 18-28C

 

 

 

 

Handle with care. These products should be handled with the same care as 3D Photopolymer. Always wear protective gloves and eye protection. Keep out of the reach of children.