Skip to content

HERO - Gaskets, Seals & Orings


No VOC low odor 

HERO Gaskets, Seals and Orings was specifically designed to create a strong air, water, oil, and grease resistant seal. Highly flexible and tuff, this Black DLP / LCD photopolymer is an excellent choice for Industry and Hobbyist a like.

Recommended Print Settings.

Due to the High-Flex nature of the resin, we recommend printing your gaskets, seals ad Orings flat on the build platform.


Bottom Layer exposure time: 70 – 100 Seconds

Normal Exposure Time: 20-30 seconds @ .05mm layer thickness.

UNIZ Slash Plus:

Bottom layer exposure times: 20 seconds @.1mm layer thickness

Normal exposure time: 15 seconds @.05 mm layer thickness.

Please Contact Us for information on Bulk ordering.

NOTE: the final products printed with the Hero and/or the Anti-hero line of U.V Resins are not intended or acceptable for direct food contact and are not safe to place in the mouth, even when properly dried and cured. Do not print products for any person or pet who may chew on or otherwise orally ingest the product.

Download Safety Data Sheet here

Store & Usage:
1.Store in cool dry places between 18-28C
2. Avoid any direct sunlight during usage. 
3. Shake well before use.
4. After printing, please wash your print in Isopropyl Alcohol
5. Use at temperature 18-28C