3DRS Gaskets, Seals & Orings

3D Resin Solutions

3DRS Gaskets, Seals and O-rings was designed to create a strong air, water, oil, and grease resistant seal. Originally developed for motorcycle helmet gaskets, this unique formulation has found it's way into many different industry applications. 

Note* This is a niche product designed for a specific purpose. This product was not designed nor tested for use in high heat environments. Print your gaskets, seals, and Orings flat on the build platform. Avoid supports and complex prints. 

Recommended Print Settings.

Creality LD-002R

Bottom layer exposure time: 70-100 Seconds

Normal exposure time: 15-20 Seconds @ .05mm layer thickness. 

ANYCUBIC PHOTON:

Bottom Layer exposure time: 70 – 100 Seconds

Normal Exposure Time: 20-30 seconds @ .05mm layer thickness.

UNIZ Slash Series:

Bottom layer exposure times: 20 seconds @.1mm layer thickness

Normal exposure time: 15 seconds @.05 mm layer thickness.

Please Contact Us for information on Bulk orders.

NOTE: the final products printed with any of the resins manufactured at 3D Resin Solutions are not intended or acceptable for direct food contact and are not safe to place in the mouth, even when properly dried and cured. Do not print products for any person or pet who may chew on or otherwise orally ingest the product.

Download Safety Data Sheet here

Store & Usage:
1.Store in cool dry places between 18-28C
2. Avoid any direct sunlight during usage. 
3. Shake well before use.
4. After printing, please wash your print in Isopropyl Alcohol
5. Use at temperature 18-28C