No VOC, low odor, and fast curing.

The Hero line of DLP Resins was designed for general form printing at lower exposure times. Hero Resin can be used on a wide range of DLP printers and exhibits excellent durability, definition, and range of use.

Recommended ANYCUBIC Photon Slicer settings for Hero Resin:

~Layer thickness (mm): .05

~Exposure Time (s): 15

~Bottom Exposure (s): 35-45

~ Bottom Layers (s): Min. 4 (ANYCUBIC defaults to 8)

The primary color line can be blended together to create your own custom color creations. Utilize the Opaque White, Black, or grey to add opacity and depth.

Each bottle ships with single-use disposable funnels for easy and safe clean-up.

See a test print an AnyCubic here:

NOTE: the final products printed with the Hero and/or the Anti-hero line of U.V Resins are not intended or acceptable for direct food contact, even when properly dried and cured.

Download Safety Data Sheet Here

Store & Usage:
1.Store in cool dry places between 18-28C
2.Avoid any direct sunlight during usage.
3.Shake well before use.
4.After printing, please wash your print in alcohol with an content of above 90
5.Use at temperature 18-28C

Customize your 3D Experience

Featured Product

Hero Resin - DLP/LCD Printing on Anycubic / Sparkmaker

Size

Color

Quantity

Custom Color Printing on FormLabs Form 2 with Anti-Hero Resin

About

Connect with us